Stage 1. Making the ‘Single Petal'.

http://mementoenterprise.com/lotus/lotusp-10.jpg

Fig.1 Take a piece of pre-cut paper. Fig.2 Fold the paper into half. Fig.3 Depress the folded paper in order to creat a folding line as shown in Fig.4

http://mementoenterprise.com/lotus/lotusp-11.jpg

Fig.4 Opening the folded paper to see the folding line. Fig.5 Folding the first half of the paper from the left to the center of the folding line. Fig.6 Depress on the folded line.

http://mementoenterprise.com/lotus/lotusp-12.jpg

Fig.7 Folding the other half of the paper from the right to the center of the folding line. Fig.8 Depress on the folding line. Fig.9 Folding the first half of the triangle shaped paper from the right to the center of the folded line.

http://mementoenterprise.com/lotus/lotusp-12a.jpg

Fig.10 Depress on the lower part of the folding line. Fig.11 Folding the other half of the triangle shaped paper to the center of the folded line and, depress only on the lower part of the folding line. Fig.12 Front view of the folded paper.

http://mementoenterprise.com/lotus/lotusp-13.jpg

Fig.13 Turning the folded paper with the back facing upward. Fig.14 Folding the triangle shaped of the paper on the right upward and, depress on the folding line. Fig.15 Folding the other side of the folded triangle shaped paper upward and, depress on the folding line.

http://mementoenterprise.com/lotus/lotusp-14.jpg

Fig.16 Completed the folding of both triangle shaped. Fig.17 Bending the folded paper half. Fig.18 The back view of the folded paper.

http://mementoenterprise.com/lotus/lotusp-15.jpg

Fig.19 Turning the folded paper with the back facing down. Fig.20 Placing thumb at the upper part of the folded paper. Fig.21 Using the right thumb to depress and hold on to the paper.

http://mementoenterprise.com/lotus/lotusp-16.jpg

Fig.22 Moving the left thumb and finger to the upper part of the paper. Fig.23 The back view of the completed "Single Petal" Fig.24 The front view of the completed 'Single Petal'.

 

Stage 2. Making the 'Unit'.

 

http://mementoenterprise.com/lotus/lotusp-17.jpg

Fig.25 Set aside 3pcs ingle Petal. Fig.26 Pick up a piece of ingle Petal, let call it a . Fig.27 Applying glue on the 4-sides of the . Begin with the first side as shown.

http://mementoenterprise.com/lotus/lotusp-18.jpg

Fig.28 Apply glue on the
second side of the
. Fig.29 Apply glue on the third side of the . Fig.30 Apply glue on the forth side of the .

http://mementoenterprise.com/lotus/lotusp-19.jpg

Fig.31 Place the between and on top of the other 2 ingle Petals. Fig.32 Slot in the between the 2 lower ingle Petals and push it toward the end. Fig.33 This is the view of Fig.33 from the back.

http://mementoenterprise.com/lotus/lotusp-20.jpg

Fig.34, Fig.35 & Fig.36 Three different viewing of the completed nit.

 

Stage 3. Making the reen Leaf

http://mementoenterprise.com/lotus/a1037.jpg

Fig.37 Prepare and set aside 5 nits.

http://mementoenterprise.com/lotus/lotusp-21.jpg

Fig.38 Pick up a new piece of ingle Patel and apply glue on the 4 sides as shown on Fig.27, Fig.28, Fig.29 and Fig.30. Fig.39 Holding a and, pick up one of the 5 nits. Slot in one side of the onto the side of the nit. Fig.40 Pushing the to the end of the nit.

http://mementoenterprise.com/lotus/lotusp-22.jpg

Fig.41 Pick up a new nit and, use the other side of to slot into the side of the new nit. Fig.42 This is the front view of the completed piece of work with 2 nits joint in one. Let call it the oint Unit. Fig.43 The back view of Fig.42.

http://mementoenterprise.com/lotus/lotusp-23.jpg

Fig.44 This is the front view of Fig.42. The red dot indicates the position of the .

 

Repeat the works to joint up 2 nits following the steps as shown on Fig.38 to Fig.41.

 

Fig.45 So far, there are 2 oint Units and a remaining nit.

http://mementoenterprise.com/lotus/lotusp-24.jpg

Fig.46 Pick up a new ingle Petal and, apply glue on the 4 sides of it to make the as shown on Fig.27 to Fig.30. Fig.47 Joining one side of the to the other side of the nit.

http://mementoenterprise.com/lotus/lotusp-25.jpg

Hold the nit which has the other half of and, joining it to one of the oint Unit. Fig.49 Pick up a new ingle Petal and repeating Fig.27 to Fig.30 to make a . Use the which has 4 sides glue to join up the remaining oint Unit.

http://mementoenterprise.com/lotus/lotusp-26.jpg

Fig.50 & Fig.51 The continuing work of Fig.49.

http://mementoenterprise.com/lotus/lotusp-27.jpg

Fig.52 & Fig.53 Pick up a new piece of ingle Petal, repeat the process of making a as shown on Fig.27 to Fig.30. Use the to join up the the 2 ends to form the circle.

http://mementoenterprise.com/lotus/a1054.jpg

Fig.54 The completed works of making the eaf.

http://mementoenterprise.com/lotus/lotusp-28.jpg

Fig.54a, Fig.54b and Fig.54c Viewing Fig.54 from different directions.

http://mementoenterprise.com/lotus/lotusp-29.jpg

Stage 4. Making the lower

 

Fig.55 & Fig.56 Pick up a piece of ingle Petal of any color other then green. Let take pink color for this instruction. Apply glue along the dotted line on the inner sides of the etal.

http://mementoenterprise.com/lotus/lotusp-30.jpg

Fig.57 Placing the pink etal between the 2 green etals. Fig.57a & Fig.57b Depressing the pink atel to ensure it is flatten and stick firm to the 2 green etals.

http://mementoenterprise.com/lotus/lotusp-31.jpg

Fig.58 Pick up a new piece of pink etal and, repeat steps Fig.55 & Fig.56. Place the pink etal next to the first ones and, repeat the steps Fig.57a & Fig.57b. Fig.59 The side views of completed works of Fig.58.

http://mementoenterprise.com/lotus/a1060.jpg

Fig.60 The completed works of Fig.58.

 

Repeat the process of Fig.58 and Fig.59, and, continue to add new pink etals until the first layer of the lower is completed.

http://mementoenterprise.com/lotus/lotusp-32.jpg

Fig.61, Fig.61a & Fig.61b show different views of the completed works for the first layer of lower.

http://mementoenterprise.com/lotus/lotusp-33.jpg

Fig.62 Pick up a new pink etal and apply glue on the 4 sides as shown on Fig.27 to Fig.30. Place the pink etal between the 2 pink etals of the first layer. Push the pink etal" to the back and ensure that it is flatten. Fig.62a This is the view of completed work of Fig.62.

http://mementoenterprise.com/lotus/a1063.jpg

Fig.63 Continue adding new pink etals on top of the first layer until the second layer of the lower is completed.

http://mementoenterprise.com/lotus/lotusp-34.jpg

Fig.64 & Fig.64a Continue adding new pink etals on top of the second layer until the third layer of the lower is completed.

http://mementoenterprise.com/lotus/lotusp-35.jpg

Fig.65 & Fig 65a Continue adding new pink etals on top of the third layer until the forth layer of the lower is completed.

http://mementoenterprise.com/lotus/lotusp-36.jpg

Fig.66 & Fig.66a Continue to add new pink etals on top of the forth layer until the fifth layer of the lower is completed.

http://mementoenterprise.com/lotus/a1067.jpg

Fig.67 Continue to add new pink etals on top of the fifth layer until the sixth layer of the lower is completed.

http://mementoenterprise.com/lotus/lotusp-37.jpg

Fig.67a, Fig.67b & Fig.67c Different views of the completed otus.